Harmonization of VFAs measurement by GC: something more than R2 to evaluate the calibration function

Anaerobic digestion is sensitive to many environmental factors requiring a robust control of this process. One of the analytical measurements considered as key parameter is the volatile fatty acids (VFAs) content. Total amount of volatile acids (TVFA) to control the relative changes over time has been suggested as a useful tool. However, TVFA does not provide sufficient information to reveal the overall reactor performance, and individual components have been considered of particular interest. Although some attempts have been described as on-line measurements for individual VFAs, normally they are determined by off-line chromatographic techniques (GC and HPLC). A previous interlaboratory study showed the lack of harmonization in the analytical methodologies dealing to individual VFAs, and giving an overall analytical performance rather poor. One of the reasons to justify these results was the inappropriate calibration procedures. It is widely used to check the linearity of the calibration curves based on the correlation and determination coefficients. However, these statistical parameters are erroneously interpreted. The objective of this interlaboratory study was to achieve the harmonization of results. By this way, the use of internal standard methodology (ISTD) should be useful to obtain accurate calibration functions. In addition, five different statistical parameters such as lack of fit test, residual standard deviation, relative standard deviation of the slope, relative standard deviation of the sensitivity and relative error were proposed to evaluate the linearity of calibration curves. Of these, lack of fit was unable to detect appropriately the linearity mainly due to its sensitivity to the precision of analytical results. The rest of statistical parameters reported could be considered as starting point for comparative purposes, being useful as acceptance criteria. The principal advantage of the GC/ISTD analytical methodology was the normalization of the slopes obtained by the participating laboratories, being very helpful to the harmonization of results.Peer Reviewe

Bruno Touschek: particle physicist and father of the electron-positron collider

This article gives a brief outline of the life and works of the Austrian physicist Bruno Touschek, who conceived, proposed and, 50 years ago, brought to completion the construction of AdA, the first electron-positron storage ring. The events which led to the approval of the AdA pro ject and the Franco-Italian collaboration which con- firmed the feasibility of electron-positron storage rings will be recalled. We shall illustrate Bruno Touschek's formation both as a theoretical physicist and as an expert in particle accelerators during the period be- tween the time he had to leave the Vienna Staat Gymnasium in 1938, because of his Jewish origin from the maternal side, until he arrived in Italy in the early 1950s and, in 1960, proposed to build AdA, in Frascati. The events which led to Touschek's collaboration with Rolf Wideroe in the construction of the first European betatron will be de- scribed. The article will make use of a number of unpublished as well as previously unknown documents, which include an early correspon- dence with Arnold Sommerfeld and Bruno Touschek's letters to his family in Vienna from Italy, Germany and Great Britain. The impact of Touschek's work on students and collaborators from University of Rome will be illustrated through his work on QED infrared radiative corrections to high energy e+e- experiments and the book Meccanica Statistica.Comment: To be published in EPJ

A reciprocal legitimation: Corrado Gini and statistics in fascist Italy

This article deals with the relationship between science and politics and in particular with the reciprocal legitimation process involving research schools and political regimes. It focuses on the case of Italian statistics during the early twentieth century. Its emergence as both an independent scientific field and a national research school, in fact, went together with the rise of nationalism and the establishment of the fascist regime. The paper uses the biography of Corrado Gini to analyze the process of mutual legitimization between science and politics under fascism. Gini's academic and professional careers show in fact how actors and ideas could compete through their ability to alter the status of the discipline, the technical functions it was assigned, and to attract funds in a changing political context Gini, as an institutional entrepreneur, was able to make his research school hegemonic in Italy by leveraging the need for scientific legitimation of new state policies during World War I and under fascism. The reinterpretation he provided of his career after the end of World War II is crucial both to deconstructing this process and to shedding light on the postwar de-legitimation of Italian statistics

Da via Panisperna all’America: I fisici italiani e la Seconda guerra mondiale

Questo testo, scritto verosimilmente negli anni Settanta, doveva costituire nelle intenzioni di Amaldi il nucleo di un libro sulla storia della fisica a Roma. In esso Amaldi ricostruì le drammatiche vicissitudini della comunità dei fisici italiani nel periodo che va dalle leggi razziali, promulgate dal regime fascista nell’autunno del 1938, alla fine della seconda guerra mondiale. In un racconto fitto di episodi in gran parte sconosciuti, rivivono le vicende legate all’emigrazione di Enrico Fermi, Franco Rasetti, Emilio Segrè, Bruno Rossi e di molti altri scienziati, e le strategie per la “sopravvivenza scientifica” adottate dai colleghi rimasti in Italia, che permetteranno loro di conseguire importanti risultati negli anni della guerra e dell’immediato dopoguerra. Il volume è completato da lettere e documenti in buona parte inediti, che fanno luce sui rapporti fra i fisici italiani costretti all’emigrazione e quelli rimasti in patria, sulle diverse posizioni assunte dai vari scienziati sul problema della bomba atomica e sulla politica della ricerca che i fisici italiani adottarono negli anni della ricostruzione

Pretreatment methods to improve sludge anaerobic degradability: A review

This paper presents a review of the main sludge treatment techniques used as a pretreatment to anaerobic digestion. These processes include biological (largely thermal phased anaerobic), thermal hydrolysis, mechanical (such as ultrasound, high pressure and lysis), chemical with oxidation (mainly ozonation), and alkali treatments. The first three are the most widespread. Emphasis is put on their impact on the resulting sludge properties, on the potential biogas (renewable energy) production and on their application at industrial scale. Thermal biological provides a moderate performance increase over mesophilic digestion, with moderate energetic input. Mechanical treatment methods are comparable, and provide moderate performance improvements with moderate electrical input. Thermal hydrolysis provides substantial performance increases, with a substantial consumption of thermal energy. It is likely that low impact pretreatment methods such as mechanical and thermal phased improve speed of degradation, while high impact methods such as thermal hydrolysis or oxidation improve both speed and extent of degradation. While increased nutrient release can be a substantial cost in enhanced sludge destruction, it also offers opportunities to recover nutrients from a concentrated water stream as mineral fertiliser. © 2010 Elsevier B.V

Harmonization of the quantitative determination of volatile fatty acids profile in aqueous matrix samples by direct injection using gas chromatography and high-performance liquid chromatography techniques: Multi-laboratory validation study

The performance parameters of volatile fatty acids (VFAs) measurements were assessed for the first time by a multi-laboratory validation study among 13 laboratories. Two chromatographic techniques (GC and HPLC) and two quantification methods such as external and internal standard (ESTD/ISTD) were combined in three different methodologies GC/ESTD, HPLC/ESTD and GC/ISTD. Linearity evaluation of the calibration functions in a wide concentration range (10-1000mg/L) was carried out using different statistical parameters for the goodness of fit. Both chromatographic techniques were considered similarly accurate. The use of GC/ISTD, despite showing similar analytical performance to the other methodologies, can be considered useful for the harmonization of VFAs analytical methodology taking into account the normalization of slope values used for the calculation of VFAs concentrations. Acceptance criteria for VFAs performance parameters of the multi-laboratory validation study should be established as follows: (1) instrument precision (RSDINST≤1.5%); (2) linearity (R2≥0.998; RSDSENSITIVITY≤4%; REMAX≤8%; REAVER≤ 3%); (3) precision (RSD≤1.5%); (4) trueness (recovery of 97-103%); (5) LOD (≤3mg/L); and (6) LOQ (10mg/L